Everything, Half The Time
First there was Crystalline, and now there’s 17M. Thinner, lighter, and faster to frame; 17M features the same no-varnish coating, scuff protection you have come to expect from Breathing Color’s no-varnish line. Combined with 17M’s quick dry technology and you have a print-and-stretch solution in just minutes!
| SKU# | 17M OBA-FREE Canvas | Price |
| BC17MPG1710 | Gloss 17″ x 10′ Trial | |
| BC17MPG2475 | Gloss 24″ x 75′ | |
| BC17MPG1775 | Gloss 17″ x 75′ (Special Order) | |
| BC17MPS1710 | Satin 17″ x 10′ | |
| BC17MPS1775 | Satin 17″ x 75′ | |
| BC17MPS2475 | Satin 24″ x 75′ | |
| BC17MPS3675 | Satin 36″ x 75′ | |
| BC17MPS4475 | Satin 44″ x 75′ | |
| BC17MPS5475 | Satin 54″ x 75′ | |
| BC17MPS6075 | Satin 60″ x 75′ | |
| BC17MPS6475 | Satin 64″ x 75′ |
| SKU# | 17M Aqueous Canvas Satin 17M | Price |
| BC17MS1710 | Aqueous Satin 17M, 17″x10′ Trial |
Key Features
 |
Stop waiting for coatings to cure- 17M is ready to stretch when you are |
 |
Fine texture for a still and undisturbed surface that opens from wider angles |
 |
No lamination required means prints are done and ready to stretch in record time |
 |
Manufactured in Austin- the Art Capital of Texas |
Product Specs
|
Base Composition |
65% polyester 35% cotton |
|
Texture |
Fine (1-over-1) |
|
Finish |
Satin or Gloss |
|
OBA Content |
Moderate |
|
Weight |
360 GSM |
|
Caliper |
17.5 mils |
|
Opacity |
98% |
|
CIE L*a*b* (F7/2) |
Satin: L* 97.70 / a* 1.40 / b* (-2.0) Gloss: L* 97.50 / a* 1.50 / b*(-3.90) |
|
Gloss Level |
Satin: 6 GU |
|
Core Diameter |
44″-wide and smaller: 2″ Padded Core |
Resources
FAQs
Q. Do I have to let my print dry before stretching / mounting?A. We recommend letting 17M prints dry for 1-2 hours before mounting or stretching for best results. Note: the dry time may vary depending on factors such as your home temperature, outside climate, and more.
Q. My canvas in curling. Help!
Glossy and satin canvas is more susceptible to curling. This curling is most often caused imperfect atmospheric conditions. Please make sure to remove your roll of canvas from the printer when not being used. Also, be sure to store it inside of the original plastic sleeve and inside of the roll box. Make sure also to store your print media as close as possible to our recommendations. Storage temperature should be around 70°F (21°C). The relative humidity in your storage room should be about 50%.
Q. How should I handle 17M no varnish canvas? What about storage?
A. To prevent the transfer of oils and dirt from your hands to the coatings on the media, it’s important to take protective measures. White cotton gloves should be worn when handling the media to keep it pristine. When not using the media, you should store it in its original packaging, exactly how it was shipped to you. Read even more about our recommended handling and storage best practices on our blog.
Q. Do I need to varnish 17M after printing?
Q. Why is the roll’s core wrapped in foam padding?
A. We put padding around each core. This cushions the inner layers of canvas, which prevents creases and grooves from appearing at the end of roll. Some other canvas and paper brands do not offer this layer of protection. What ensues is common creasing and grooving on the canvas material. Our 17M is designed and packed with care. Here’s how we do it with our no varnish canvas:
Stop wasting the last few feet of your media. Discover 17M Satin/Gloss and use every inch of your no varnish canvas.